Konica Minolta bizhub 552 - Manual (Page 11)

bizhub 652/552 2-3
2.1 Control Panel and functions 2
4 Power Save Press this key to enter Power Save mode.
While the machine is in Power Save mode,
the indicator on the Power Save key lights
up in green and the Touch Panel goes off.
To exit from Power Save mode, press the
Power Save key again. -
5 Mode Memory Press this key to recall registered fax/scan
settings. p. 2-7
6 Utility/Counter Press this key to display the Utility screen
and the Meter Count screen. p. 2-6
7 Reset Press this key to reset all settings (except
programmed settings) entered using the
Control Panel and Touch Panel. p. 2-5
8 Interrupt This key is not used in the enlarge display
mode. -
9 Stop Pressing this key while copying, scanning or
printing temporarily stops the operation. p. 2-5
10 Proof Copy Press this key to print a single proof copy to
be checked before printing a large number
of copies. p. 2-12
11 Start Press to start the copy, scan or fax opera-
tion. p. 2-5
12 Data Indicator Flashes in blue while a print job is being re-
ceived. Lights up in blue when a print job is
queued to be printed or while it is being
printed. The indicator lights up in blue when
there is saved fax data or unprinted fax data. -
13 C (Clear) Press this key to clear a value (such as the
number of copies and a zoom ratio) entered
using the Keypad. p. 2-11
14 Keypad Use the keypad to enter the number of cop-
ies, zoom ratio, and a fax number. -
15 Guidance This key is not used in the enlarge display
mode. -
16 Enlarge Display Press this key to switch between the en-
larged display screen and the standard size
screen. If you use PageScope Authentica-
tion Manager for authentication, the En-
large Display screen is not available. p. 2-10
17 Accessibility Press this key to display the screen for con-
figuring settings for user accessibility func-
tion. p. 2-8
18 Access If user authentication or account track is en-
abled, press this key after entering the user
name and password (for user authentication)
or the account name and password (for ac-
count track) in order to use this machine. p. 2-10
19 Brightness dial Allows you to adjust the brightness of the
Touch Panel. -
20 User Box This key is not used in the enlarge display
mode. -
21 Fax/Scan Enters Fax/Scan mode. While the machine is
in Fax/Scan mode, the indicator on the
Fax/Scan key lights up in green. p. 2-6
22 Copy Press this key to enter Copy mode. (As a de-
fault, the machine is in Copy mode.) While
the machine is in Copy mode, the indicator
on the Copy key lights up in green. p. 2-5
Overview Reference