Audiovox Satellite Radio Receiver - Manual (Page 30)

30
Figure 18. Tune Select Screen
Tune Select
This feature allows the user to store current program information (Artist
and Song title) for future comparison against the incoming XM® signal.
The Xpress XM® unit can hold up to 20 entries, after which any new
information saved will replace the oldest entry in memory.
To store a song or artist, press and hold the Rotary/Select Knob or the (XM)
Select Button on the remote control until the unit emits a confirmation tone.
When the exact Artist or Song is detected on the XM® broadcast, the user
will be notified via a confirmation tone. An alert will also appear on the
screen for approximately 8-sec identifying that a match was found.
Pressing the Rotary/Select Knob or the (XM) Select Button on the remote
control while this screen is active forces the unit to jump to the station
currently playing desired Artist or Song.
Tune Select Erase All
To delete all songs from the Tune Select list go to menu options then use
the Rotary/Select Knob or the UP and DOWN buttons on the remote
control to choose