Audio level – Audiovox Satellite Radio Receiver User Manual

Page 24

As a result, the display backlight will turn off 20 seconds after this
selection is entered, provided no other button is pressed in the
meantime.

Audio Level

This feature allows the user to set the audio output signal level (see
Figure 12). Upon entering the audio level mode, a horizontal bar graph
is displayed with a minus (-) sign on the left and a plus (+) on the right.
Use the Rotary/Select Knob to adjust the audio level. When the Rotary/
Select Knob is turned CW the audio level signal is increased. When the
Rotary/Select Knob is turned CCW the audio level signal is decreased.
The UP and DOWN buttons on the Remote Control also provide a
similar function. When the desired setting is achieved, press the
Rotary/Select Knob or (XM) Select Button on the Remote Control to
confirm.

NOTE: To prevent distortion caused by overdriving the audio playback
device input, it is recommended that you adjust the audio level signal to
mid-range.

Figure 12. Audio Level Screen

Screen displayed when the
FM Frequency is set to OFF

Screen displayed when FM
Transmitter is set to “ON”