Kramer Electronics VS-41HDCP - Manual (Page 23)

20 VS-41HDCP - Technical Specifications
8 Technical Specifications
INPUTS: 4 DVI Connectors
OUTPUT: 1 DVI Connector
MAX. DATA RATE: 6.75Gbps ( 2.25Gbps per graphic channel)
COMPLIANCE WITH
HDMI STANDARD: Supports HDMI and HDCP
RESOLUTION: Up to 1080p, UXGA
POWER SOURCE: 5V DC, 440mA
CONTROLS: Front panel buttons, Infrared remote control transmitter, RS-232,
contact closure remote control, Ethernet
DIMENSIONS: 22cm x 18cm x 4.5cm (8.6” x 7” x 1.8”) W, D, H
WEIGHT: 1.3kg (2.9lbs) approx.
ACCESSORIES: Power supply
OPTIONS: Kramer DVI cables, RK-1 rack adapter
Specifications are subject to change without notice
Go to our Web site at http://www.kramerelectronics.com to access the list of resolutions
8.1 Default Communication Parameters
EDID
Passes EDID/HDCP signals between the display and the source
RS-232
Protocol 2000 Protocol 3000 (Default)
Baud Rate: 9600 Baud Rate: 115,200
Data Bits: 8 Data Bits: 8
Stop Bits: 1 Stop Bits: 1
Parity: None Parity: None
Command Format: HEX Command Format: ASCII
Example (Output 1 to Input
1): 0x01, 0x81, 0x81,
0x81 Example (Output 1 to Input 1): #AV
1>1
Switching Protocol
P2000 -> P3000 P3000 -> P2000
Command: 0x38, 0x80, 0x83, 0x81 Command: #P2000
Front Panel: Press and hold input 1 and input 3
simultaneously Front Panel: Press and hold input 1 and
input 2 simultaneously
Ethernet
Default Settings Reset Settings
IP Address: 192.168.1.39 Power cycle the unit while holding in the
Factory Reset button, located on the rear panel
of the unit.
TCP Port #: 5000
UDP Port #: 50000