Kramer Electronics VS-41HDCP - Manual (Page 17)

14 VS-41HDCP - Operating the VS-41HDCP
2. Click the Connect button to connect to the machine to select the method to
connect to the Ethernet port of the VS-41HDCP.
Select:
 Ethernet, if you know the IP address number or the machine name.
The default name for the machine is KRAMER_XXXX (the four digits
are the last four digits of the machine’s serial number)
 Serial, if you are connected via a serial port

USB, if you are connected via the USB
3. Select the connection method and click Connect .
Figure 8: Device Properties Screen
4. If required, make changes and click Save. If not, click Exit.