Australian Monitor AMD P Series - Manual (Page 3)

The AMD P series of power amplifiers from Australian Monitor
represent a quantum leap forward in connectivity, controllability &
flexibility in the constant voltage amplifier market. The AMD series
allows contractors to integrate the power amplifier to third party
control systems for remote control and status reporting. The AMD
series amplifiers also offer the flexibility of comprehensive on board
DSP processing and 24VDC back up power.
Australian Monitor AMD P series is the future of constant
voltage amplification.
Revision 1.2 May 2012
INTRODUCTION 3
FRONT PANEL 4
REAR PANEL 5
INSTALLATION 6
SOFTWARE APPLICATION 7
THIRD PARTY CONTROL PROTOCOL 11
DIMENSIONS 18
SPECIFICATIONS 19
WARNING!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH
AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Rating plate and caution marking are marked on the back enclosure of the apparatus
AMD SERIES
PAGE 3 AMD SERIES INSTALLATION AND OPERATION MANUAL
INTRODUCTION AND CONTENTS