Media Technology Systems ION8.8 User Manual
Page 7
Page 7 of 26
Jul‐09
The
SNMP
controls
include
all
the
standard
CobraNet™
OID’s
and
the
Cirrus
DSP
extensions.
See
Cirrus
Logic’s
UM23
users
manual
for
full
details
of
the
chipset
and
PM25
programmers
manual
for
full
details
of
the
SNMP
controls…
http://www.cobranet.info/en/products
•
Ethernet
port:
The
Ethernet
port
provides
control
&
monitoring
capability
of
all
DSP
and
CobraNet™
parameters
using
a
simple
TELNET
based
protocol.
In
smaller
systems,
it
is
likely
that
the
CobraNet™
port
will
be
used
for
both
audio
transport
and
control
&
monitoring.
For
larger
systems,
where
the
audio
transport
is
on
a
separate
VLAN
(to
control
bandwidth),
the
TELNET
port
will
provide
access
to
separate
control
&
monitoring
port
that
can
be
added
to
the
general
AV/BMS
system.
Note: The control & monitoring is either/or, ie TELNET or SNMP, but not both
simultaneously.
•
Additional
RS485
Port:
The
additional
RS485
port
provides
a
serial
connection,
so
that
3
rd
party serial data can be bridged on to the CobraNet™ network for
communications between CobraNet™ nodes.
•
DSP: The DSP is based on the CS496122 chipset and provides >100MIPS of
processing power.
In
general,
the
MTS
GUI
will
be
used
for
basic
configuration
of
the
interface
and
saving
of
preset
values
and
Stardraw
control
(see
below)
will
be
used
for
User
Control
and
Monitoring.
In addition, 3
rd
party control systems (such as AMX and Crestron) can be used to
provide Control and Monitoring capabilities.