AVerMedia Technologies EB1004 - Manual (Page 29)

26
3.9 SENSOR SETUP
SENSOR SETUP
> SENSOR RECORD TIME
15
ALARM OUT TIME 05
CHANNEL-1 TYPE:NORMAL-CLOSE
CHANNEL-2 TYPE:NORMAL-OPEN
CHANNEL-3 NOT INSTALLED
CHANNEL-4 NOT INSTALLED
PRESS (< , >), THEN(SELECT)
PRESS (MENU) TO EXIT
3.9.1 SENSOR RECORD TIME
This determines the duration of sensor recording (in minutes) in the event that the
sensor devices detect an event. There are 6 selections to choose from.
3.9.2 ALARM OUT TIME
This determines the duration of sound (in minutes) that is set off when the alarm
device is triggered.
3.9.3 CHANNEL-1 ~ CHANNEL-4
These correspond to the four sets of sensor inputs on the DVR unit. Customize
these according to the initial state of the attached sensor devices. There are three
states to choose from:
NOT INSTALLED : Indicates that the channel does not have a sensor device
connected.
NORMAL-OPEN : Indicates that the initial state of the sensor device is
Normal-Open. When the sensor device detects an event and its state changes to
Normal-Close, video recording is initiated.
NORMAL-CLOSE: Indicates that the initial state of the sensor device is
Normal-Close. When the sensor device detects an event and its state changes to
Normal-Open, video recording is initiated.