AVerMedia Technologies EB1004 - Manual (Page 12)

9
1.4.3 Install a Removable Hard Drive Case in a PC (Optional)
For users who purchase an optional hard drive case, please follow the steps to install
the case in a PC.
1. Power off your PC and remove the cover of your PC.
2. Remove a front cover and free a 5 1/4” drive bay. Insert the hard disk holder.
Mount the hard disk holder, screw up the holder, and connect the IDE slot and
power connector from PC’s motherboard.
3. Remove the drawer of the removable hard disk case. Please refer to 1.4.2 Install
the Hard Drive in a Removable Case to install the hard drive.
4. Slide the drawer into the removable hard disk case, power on the PC and check
the LED indicators. If the LED indicators light up, it is ok to use the hard drive in
the removable case.
1.4.4 Connecting Devices
At the back panel of the DVR unit, you can connect up to four video cameras, four
sensor devices, and one alarm device. You can connect a VGA monitor or a television
monitor as a display device. Use a USB cable to connect to a PC if it is necessary.
Connecting cameras, sensors, alarm, and display device