ACTiSYS VER. 061030 CAM-6500 - Manual (Page 64)

59
setup speed range is from 1 ~ 15. Refer to below table for more information.
PAN (degree/sec.) TILT (degree/sec.)
Speed 1 10 8
Speed 2 23 12
Speed 3 35 22
Speed 4 45 30
Speed 5 55 40
Speed 6 65 50
Speed 7 75 58
Speed 8 185 185
Speed 9 205 210
Speed 10 225 240
Speed 11 250 275
Speed 12 280 305
Speed 13 320 335
Speed 14 365 365
Speed 15 400 400
♦ DWELL TIME
The DWELL TIME is the duration time that the speed dome will stay at the
sequence point, and the range is from <0> to <127> seconds. The speed
dome will go to the next sequence point when the DWELL TIME is up. If the
setting is <0>, the speed dome will stay at this sequence point until users
manually move the speed dome.
♦ RUN SEQUENCE
User can command the speed dome camera to run the selected Sequence line
manually.
♦ EXIT
Select the item to exit the SEQUENCE menu.
B-3-15 AUTOPAN
Auto-pan means rotating or scanning side-to-side motion by a speed dome camera
to view an area horizontally. The parameters can be set on this page.