Innotech Device Communications User Manual
Page 33

Page 25
Chapter 4 – Configuring Ethernet settings of Innotech devices
DS 99.05 – Ethernet Setup Manual for Device Communications
4
The
4.
Configure BACnet Gateway Settings window will open. Click on the
Ethernet tab
to configure the Ethernet settings of the IG03 or the IG04, as illustrated in Figure 4-22
and Figure 4-23 respectively.
IG03 Ethernet Tab – Configure Ethernet settings
Figure 4-22:
From the FusionLIVE configuration page, click on the configuration button for the
3.
IG03 or IG04, as illustrated in Figure 4-21 below.
Click to configure IG03 or IG04 settings in FusionLIVE
Figure 4-21:
Configure settings button – IG03
Configure settings button – IG04
MUST be configured
as Static