Ethernet connection status indication, Table 3-1: ethernet status leds – Innotech Device Communications User Manual
Page 19
Page 11
Chapter 3 – Connecting Innotech devices for initial configuration
DS 99.05 – Ethernet Setup Manual for Device Communications
3
Ethernet connection status indication
Typically an Ethernet connection is established using an RJ45 cable of Category 3 (CAT3)
or above rating as described in
Chapter 2 – Ethernet standards and cabling information
.
The coloured LEDs on the Ethernet port indicate the status of the Ethernet connection.
The different LED colours and the corresponding status indication are shown in Table 3-1.
RJ-45 Socket
Left LED
Right LED
Ethernet Link LED (Left LED)
Ethernet Activity LED (Right LED)
LED colour Indication
LED colour Indication
OFF
Not connected
OFF
No Ethernet activity
Amber
Connected at 10MBps
Amber
Connected at Half-duplex
Green
Connected at
100MBps
Green
Connected at Full-duplex
Ethernet status LEDs
Table 3-1: