Configuring ig01, ig03, ig04, and iws01, Configuring network settings of your computer – Innotech Device Communications User Manual
Page 25

Page 17
Chapter 4 – Configuring Ethernet settings of Innotech devices
DS 99.05 – Ethernet Setup Manual for Device Communications
4
Configuring IG01, IG03, IG04, and IWS01
As previously mentioned the Innotech Gateways – IG01, IG03, and IG04 – and the
IWS01 are factory configured with a static IP address. Using the respective embedded
web server for each device with Internet Explorer 8 or greater web browser, you can
configure the Ethernet settings to suit your requirements. But in order to initially access
the respective embedded web server out of the box, you need to configure the network
settings of your computer to be on the same network range as the default factory
Ethernet settings of your particular device(s).
Therefore the first part of this section provides instructions to configure the network
settings of your computer. If you are familiar with how to configure the network settings of
your computer, go ahead and change them accordingly. When you are done click on one
of the links below to configure your Innotech Gateway. Otherwise continue on to the next
section for instructions to configure the network settings of your computer.
Configuring Ethernet settings of IG01 with embedded web server
Configuring Ethernet settings of IG03 and IG04 with FusionLIVE
Configuring Ethernet settings of IWS01 with embedded web server
The next step is to edit the properties of your default LAN adapter. The instructions to
do this vary slightly depending on which operating system you are using. Therefore
instructions for Windows 7, Windows Vista, and Windows XP are provided. Click on one
of the links below for instructions pertaining to your operating system.
Windows 7 Professional
Windows Vista Professional
Windows XP Professional
Configuring network settings of your computer
Regardless of which Windows operating system you are using, open Control Panel from
the Windows
Start Menu, as illustrated in Figure 4-7 below.
Win 7 – Open Control Panel from Start Menu
Figure 4-7:
NOTE
The screenshots shown in this section were taken on a computer with Windows 7 Professional
operating system. Information for other supported operating systems is illustrated as necessary.