HT instruments iDM70 - Manual (Page 20)

iDM70
EN - 19
4.13. Distance measurement with timer
The instrument allows measuring distances with timer
setting (max. 60s).
1. With the instrument in stand-by, press the key to
select the type of reference (see § 4.2)
2. Press the key to enter the Timer mode with a
default duration of 5s, or press and hold the key
for a quick setting of the desired value, or use the
or keys to set the desired value with 1s scan
3. Press the key or the side MEAS key or wait a
few seconds after setting the timer for measurement
to start. The instrument activates a countdown
4. In the last 2 seconds the instrument sounds loud.
Upon timer end the value is shown on the resulting
display
5. Measuring result is automatically saved in the
instrument's memory
4.14. Bluetooth
connection
The instrument allows for the connection to mobile
devices such as iPhone, iPad, iPod, Android via
Bluetooth connection, provided you install the
HTLaserMeter APP on the devices. To activate
connection, proceed as follows:
1. Press and hold the key for 2 seconds. The
symbol “Bluetooth” appears on the display
2. Connect the instrument to the mobile device via the
HTLaserMeter APP (see the relevant user manual)
3. Upon the first connection between the instrument
and the device, a message requesting a Pin may be
shown by the device. In this case, please enter code
“0000”
4. Press and hold the key for two seconds to quit
the Bluetooth function or switch off the instrument