IEI Integration EP-308A v1.12 - Manual (Page 18)

EP-308A POS
Page 8
WARNING:
When installing the EP-308A, make sure to:
ƒ Set screen resolution to 800 x 600: To make sure that the touch
panel works correctly
ƒ Turn the power off: Chance of electrocution. Turn off the monitor
and unplug it from the power supply.
ƒ Only let certified engineers change the hardware settings:
Incorrect settings can cause irreparable damage to the product.
ƒ Install the monitor with assistance: The product is very heavy and
may be damaged by drops and bumps. Two or more people should
install the panel PC.
ƒ Take anti-static precautions: Electrostatic discharge can destroy
electrical components and injure the user. Users must ground
themselves using an anti-static wristband or similar device.
The installation steps below should be followed in order.
Step 1: Unpack the flat panel PC
Step 2: Check all the required parts are included
Step 3: Install the hard drive (optional)
Step 4: Install the CompactFlash® card (if not included)
Step 5: Install the printer paper
Step 6: Connect peripheral devices to the bottom panel of the flat panel PC
Step 7: Connect the power cable
Step 8: Configure the system
2.1 Unpack the Panel PC
To unpack the flat panel PC, follow the steps below: