3 ppc-3712 hdd installation, Figure 4-9: ppc-3710 hdd retention screws – IEI Integration PPC-37xx-N270 v2.00 User Manual

Page 50

PPC-37xx-N270 Panel PC

Page 36

Figure 4-9: PPC-3710 HDD Retention Screws

Step 4:

Install the HDD into the PPC-3710 by aligning the retention screw holes in the

HDD bracket with the retention screw holes on the panel PC. Insert the four

retention screws.

Step 5:

Connect the SATA cable from the motherboard to the rear of HDD.

Step 0:

4.8.3 PPC-3712 HDD Installation

To install the HDD, please follow the steps below:

Step 1:

Remove the back cover. See Section 4.5.3 above.

Step 2:

Remove the CD-ROM bracket. See Section 4.9

Step 3

below.

Step 3:

Attach the HDD brackets to the HDD. To do this, align the two retention screw

holes in each HDD bracket with the retention screw holes on the side of the

HDD. Insert two retention screws into both brackets on both sides of the HDD