IEI Integration PPC-37xxA-N26 v1.00 - Manual (Page 64)

PPC-37xxA-N26 Panel PC
Page 48
Step 2: Align the bracket with the screw holes.
Step 3: To secure the bracket to the PPC-37xxA-N26, insert the retention screws into
the screw holes and tighten them. S te p 0 :
3.11 Bottom Panel Connectors
The bottom panel of the PPC-37xxA-N26 contains I/O connectors, power connector and
power switch. Detailed descriptions of the connectors can be found in the subsections
below.
3.11.1 Audio Connectors
The audio jacks connect to external audio devices.
ƒ Mic: Connects to a microphone.
ƒ Line-in: Connects to a player or other audio sources.
ƒ Line-out: Connects to a headphone or a speaker. With multi-channel
configurations, this port can also connect to front speakers.
3.11.2 HDMI Connector
The HDMI connector transmits a digital signal to compatible HDMI display devices such
as a TV or computer screen. To connect the HDMI cable to the PPC-37xxA-N26, follow
the steps below.
Step 1: Locate the HDMI connector . The location is shown in Figure 1-4.
Step 2: Align the connector . Align the HDMI connector with the HDMI port. Make sure
the orientation of the connector is correct.