1 wall mounting, Figure 3-23: wall-mounting bracket – IEI Integration PPC-37xxA-N26 v1.00 User Manual

Page 52

PPC-37xxA-N26 Panel PC

Page 36

3.10.1 Wall Mounting

To mount the PPC-37xxA-N26 panel PC onto a wall, please follow the steps below.

Step 1:

Select the location on the wall for the wall-mounting bracket.

Step 2:

Carefully mark the locations of the four bracket screw holes on the wall.

Step 3:

Drill four pilot holes at the marked locations on the wall for the bracket retention

screws.

Step 4:

Align the wall-mounting bracket screw holes with the pilot holes.

Step 5:

Secure the mounting bracket to the wall by inserting the retention screws into

the four pilot holes and tightening them (Figure 3-23).

Figure 3-23: Wall-mounting Bracket

Step 6:

Insert the four monitor mounting screws provided in the wall mounting kit into the

four screw holes on the real panel of the monitor and tighten until the screw

shank is secured against the rear panel (Figure 3-24).

Step 7:

Align the mounting screws on the monitor rear panel with the mounting holes on

the bracket.