3 preinstalled components, 4 installation and configuration steps, Reinstalled – IEI Integration PPC-37xxA-N26 v1.00 User Manual

Page 36: Omponents, Nstallation and, Onfiguration, Teps

PPC-37xxA-N26 Panel PC

Page 20

Anti-static Discharge: If a user open the rear panel of the panel PC, to

configure the jumpers or plug in added peripheral devices, ground themselves

first and wear and anti-static wristband.

3.3 Preinstalled Components

The following components are all preinstalled.

Motherboard

DDR3 memory module

TFT

LCD

Touchscreen

Preinstalled OEM customizations may include the following.

HDD

Wi-Fi

module

Optical disk drive (PPC-3712A-N26 only)

3.4 Installation and Configuration Steps

The following installation steps must be followed.

Step 1:

Unpack the PPC-37xxA-N26.

Step 2:

Set the jumper settings (not usually necessary).

Step 3:

Install the mSATA SSD, HDD and optical disk drive.

Step 4:

Mount the PPC-37xxA-N26 panel PC.

Step 5:

Connect peripheral devices to the bottom panel of the PPC-37xxA-N26.

Step 6:

Configure the system.

Step 0: