INSTEON 75791 Manual User Manual
Insteon® outdoor wireless ip camera, Owner’s manual
Table of contents
Document Outline
- 1. WELCOME
- 2. SOFTWARE OPERATION
- 2.1 IP Camera Tool
- 2.2 Camera Login
- 2.4 For Visitor
- 2.5 For Operator
- 2.6 For Administrator
- 3.1 Alias Settings
- 3.2 Date and Time Settings
- 3.3 User Settings
- 3.4 Multi-Device Settings
- 3.5 Basic Network Settings
- 3.6 Wireless LAN Settings
- 3.7 ADSL Settings
- 3.8 UPnP Settings
- 3.9 DDNS Service Settings
- 3.10 Mail Service Settings
- 3.11 FTP Service Settings
- 3.12 Alarm Service Settings
- 3.13 Upgrade Device Firmware
- 3.14 Backup and Restore Settings
- 3.15 Restore Factory Settings
- 3.16 Reboot Device
- 3.17 Log
- 3.18 Back
- 4. APPENDIX
- 4.1 Frequently Asked Questions
- Reset the administrator username and password by making sure the camera is powered on, then pressing and holding the camera reset button for 15 seconds. This will factory restore the username and password to “admin” with no password.
- 4.1.2 Why do I keep seeing “Subnet doesn’t match, dbclick to change”?
- If IP Camera Tool shows this error, select Obtain IP from DHCP server. If this error still exists afterward, check your LAN connection and verify that the camera subnet and gateway are the same as your computer.
- 4.1.3 Why isn’t my video streaming or showing images?
- 4.1.4 Why isn’t the IP camera accessible on internet?
- 4.1.5 IP Camera Tool can’t find the camera’s IP
- 4.1.6 Why has the UPnP failed?
- 4.1.7 Why can’t I find a desktop shortcut to IP Camera Tool?
- 4.1.8 Why can’t I change the record path?
- 4.1.9 Why can’t I find the multi-device settings and record icons?
- 4.1.10 Why won’t my camera connect wirelessly?
- 4.1.11 Why can’t I see my other cameras in multi-device WAN?
- 4.1.12 I only see a black screen or undefined characters when using remote login.
- 4.2 Default Parameters
- 4.4 Specifications
- 4.1 Frequently Asked Questions
- 5.0 OBTAINING TECHNICAL SUPPORT