GxT Ferret 928 Amps Probe Kit - Manual (Page 2)

FERRET BRAND LIMITED PRODUCT WARRANTY
FERRET INSTRUMENTS, INC. of Cheboygan Michigan, warrants to the original purchaser that any products manufactured or supplied by Ferret In-
struments, Inc. are free from defects in materials and work man ship for a period of three years from date of pur chase. Our sole obligation for a product
within the above war ran ties will be to repair or replace, at our option, any defective parts and return the product to the sender within the U.S.A., ship-
ping prepaid, if it is sent to our Repair Department shipping prepaid and accompanied by proof of purchase. The above warranty is extended for the
fl ashtubes in timing lights which are within fi ve years of the date of manufacture.
EXTENDED SERVICE POLICY
A Ferret Instruments product less than fi ve years old according to the date of man u fac ture, and which is returned with transportation charges prepaid
to: Ferret In stru ments, Inc., Repair Department, 1310 Higgins Drive, Cheboygan, MI 49721, will be repaired or replaced, at factory option, for a service
charge not to exceed 40% of the latest factory suggested user price; plus return transportation charges and insurance. If the product has been dis con -
tin ued, the nearest equiv a lent prod uct may be substituted.
This Warranty and Extended Service Policy do not apply to products which have been altered outside the factory; or repaired by anyone other than
the factory or its authorized service centers; or which have been damaged from accidents, neg li gence, or abuse; or have been used differently than
described in the printed instructions. Please note that wear and tear on leads and replacement of consumable (paper, oxygen sensors, Nox Sensors,
etc.) items, is not cov ered by war ran ty.
Ferret Instruments, Inc.'s sole liability and buyer's exclusive remedy is limited to repair or replacement of the product as stated in the Limited Product
Warranty and the Extended Service Policy. THERE ARE NO OTHER WAR RAN TIES EX PRESSED OR IMPLIED IN CLUD ING THOSE OF MER-
CHANT ABIL I TY OR FIT NESS FOR A PARTICULAR PUR POSE AND FERRET INSTRUMENTS, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CON SE QUEN TIAL DAM AG ES ARISING FROM THE SALE OR USE OF THE PROD UCT.
Some states do not allow limitations on the length of implied warranties nor ex clu sion or limitations of incidental or consequential damages, so that the
above limitations and/or ex clu sion may not apply to you. This warranty gives you specifi c legal rights and you may also have other rights which may
vary from state to state.
SAFETY PRECAUTIONS
• Do not look into the light beam of timing lights. Internal eye burns may be the result. The pain usually starts in a
day or two.
• Do not touch rotating engine parts that appear stopped or slowed under the strobe light fl ashes.
• Always wear safety glasses, or other eye protection when testing vehicles. Be extra careful near batteries and
moving parts.
• Battery gas is highly explosive.
a. If a battery explodes, fl ush the acid away from person's skin with generous amounts of water. Follow up with a
neutralizing solution of baking soda and then more water. Med i cal treatment for acid burns may be necessary.
Treat clothing, vehicle parts, and equipment similarly. Any acid traces inside equipment must be re moved by
generous rinsing. Dry off equipment afterwards and place in a warm 50° C (120° F) oven until thoroughly dry.
b. Never use a wrench on the ungrounded battery terminal until the grounded one has been dis con nect ed. Con-
tact between the vehicle body metal and the "hot" terminal can cause sparks to ignite gas or even weld tools
into a battery short circuit.
c. Keep the space around a battery well ventilated.
d. Do not make sparks or allow fl ames near batteries.
• Before working on a vehicle, set the brakes and block the wheels. Beware of au to mat ic parking brake re leas es.
• Keep your work area well ventilated and free of exhaust. Engine exhaust contains deadly poisons.
• Avoid electrical shocks caused by getting too close to live ignition wires or touching the coil TACH ter mi nal. A
person's reaction near a running engine can be more damaging than the shock.
• Keep spark producing devices at least 0.5m (18") above the fl oor to reduce the hazard of igniting gasoline vapor.
• Do not let test leads wind up in a fan or pulley. Route leads away.
• Remove fi nger rings and metal wristbands. They can short terminals and become very hot from electric current.