GxT Ferret 31 Scan Tool - Manual (Page 3)

2 3
Introduction
The Scan Tool Enhanced OBDII Analyzer is compatible with 1996 Model
Year vehicles sold in the United States (OBDII) , and 1998 Model Year
and later vehicles sold in other countries (EOBD). The Scan Tool can
be used to read the datastream, read and erase Diagnostic Trouble
Codes (DTC’s), display the Readiness Monitors, and read continuous
and noncontinuous test modes.
Specifications
Protocol Support
ISO-9141 .............................................................. Both K and L Lines
ISO-9141-2 CARB................................................ Both K and L Lines
SAE J1950 .....................................................VPW and PWM Modes
CANbus ....................................................................... up to 1 Mbaud
Physical Characteristics
Weight ................................................................................... 1 Pound
Size .............................................................. 3.9 x 6.24 x 1.17 inches
Length OBD II/EOBD-cable...................................................... 9 Feet
Power source, connected to the car......................................+12VDC
Power source, Battery Adapter................................................+9VDC
Current Draw ...................................................................... < 500 mA
Environmental Characteristics
Operating temperature ................................................+32° - +120°F
Humidity............................................................................... 30 - 90 %
Storing temperature.......................................................-20° - +120°F
PC Requirements
To perform software updates on your Scan Tool, you will need a PC
running Windows 95 or 98, and an open serial port.