Garmin GNS 530 - Manual (Page 68)

GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. H 5-2
SECTION 5
FLIGHT PLANS
4) A blank Flight Plan Page appears for the first
empty storage location. Use the small and
large right knobs to enter the identifier of the
departure waypoint and press the ENT Key.
5) Repeat step 4 to enter the identifier for each
additional flight plan waypoint (Figure 5-4).
Figure 5-4 Flight Plan Page
6) Once all waypoints have been entered, press
the small right knob to return to the Flight
Plan Catalog Page.
Flight Plan Editing
Adding a waypoint to an existing flight
plan:
1) Press the FPL Key and turn the small right
knob to display the Flight Plan Catalog Page.
2) Press the small right knob to activate the
cursor.
3) Turn the large right knob to highlight the
desired flight plan and press the ENT Key.
4) Turn the large right knob to select the point to
add the new waypoint. If an existing waypoint
is highlighted, the new waypoint is placed
directly in front of this waypoint (Figure 5-5).
Figure 5-5 Flight Plan Page
5) Use the small and large right knobs to enter
the identifier of the new waypoint (Figure 5-6)
and press the ENT Key.
Figure 5-6 Waypoint Identifier Field Selected
6) Once all changes have been made, press the
small right knob to return to the Flight Plan
Catalog Page (Figure 5-7).
Figure 5-7 Edited Flight Plan Page