Garmin GNS 530 - Manual (Page 41)

GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. H
SECTION 3
NAV PAGES
3-5
5) Press the ENT Key to select the desired data
item and return to the Default NAV Page.
6) Press the small right knob momentarily to
remove the cursor from the page.
Restoring Factory Settings
All data fields settings can be quickly returned to
original factory settings.
Restoring all six data fields to factory
default settings:
1) From the Default NAV Page, press the MENU
Key to display the Default NAV Page Menu.
2) Turn the large right knob to highlight the
‘Restore Defaults?’ option (Figure 3-7) and
press the ENT Key.
Figure 3-7 Default NAV Page Menu
Dual Unit Considerations
A ‘Crossfill?’ option is also provided for the Default
NAV Page. This option transfers a direct-to destination or
flight plan to a second Garmin 400 or 500 Series unit. See
Section 10.2, Flight Planning Page: Crossfill for additional
details on using the crossfill option.
Auto Zoom
An auto zoom feature is available for the Default NAV
Page, which automatically adjusts from an enroute scale of
200 nm through each lower scale, stopping at 5.0 nm as
you approach your destination waypoint. By default, the
auto zoom feature is disabled.
Enabling or disabling the auto zoom
feature
1) From the Default NAV Page, press the MENU
Key to display the options menu (Figure 3-8).
Figure 3-8 Default NAV Page Menu
2) Turn the large right knob to highlight ‘Enable
Auto Zoom’ (or ‘Disable Auto Zoom’).
3) Press the ENT Key to select this option.