Garmin GNS 530 - Manual (Page 186)

GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. H 10-26
SECTION 10
AUX PAGES
Setup Page: Date/Time
Displaying local time or UTC:
1) Select ‘Date/Time’ from the Setup Page, using
the steps described at the beginning of this
section.
2) The flashing cursor highlights the time format
field. Turn the small right knob to display a
window of available time formats: Local 12hr,
Local 24hr, or UTC (Figure 10-39).
Figure 10-39 Time Format Window
3) Continue turning the small right knob to select
the desired time format.
4) Press the ENT Key to accept the selection.
Setting the local time:
1) Select ‘Date/Time’ from the Setup Page, using
the steps described at the beginning of this
section.
2) Turn the large right knob to highlight the time
offset field (Figure 10-40).
Figure 10-40 Time Offset Field Selected
3) Use the small and large right knobs to enter
the desired offset, beginning by entering a
minus (-) or plus (+) sign to indicate whether
the offset is behind UTC or ahead of UTC. In
the United States, all local time offsets use
minus, or behind UTC.
4) Press the ENT Key to accept the selected
offset.
NOTE: When a local time offset is entered, only
‘Local 12 hour’ or ‘Local 24 hour’ can be selected.
The ‘UTC’ time format setting ignores any time
offset entry.