Yamaha EMX120CD - Manual (Page 44)

E-36
USING SOUND FIELD PROCESSOR
Adjusting DELAY TIME
You can adjust the time difference between the beginning of
the sound from the front speakers and the beginning of the
effect sound from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs (except
3
STEREO) individually.
Control range
PRO LOGIC : 15, 20, 25, 30 milliseconds
HALL, ARENA,
DISCO, STADIUM,
MONO MOVIE
: 15, 20, 25, 30, 40, 50 milliseconds
1
Press the CENTER/REAR/DELAY selector button once or
more so that “DEL” appears on the display.
2
By continuously pressing the LEVEL control + or – button,
the value changes continuously.
Notes
● When 3 STEREO is selected, this adjustment cannot
be made.
●
Adding too much delay will cause an unnatural effect with
some sources.
● When the LEVEL control button is pressed, sound may be
momentarily interrupted.
Note
The values of the delay time, center level and rear level you
set the last time will remain memorized even when this unit is
in the standby mode.
However, if the power cord is kept disconnected for more
than one week, these values will be automatically changed
back to the original factory settings.
TIME
A
PROG
B C D
+ I0
E
CD TUNER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
PRESET
INPUT
MUSIC PROGRAM
STANDBY/ON
DISPLAY SLEEP
ECHO
FLAT
LEVEL KARAOKE
VOLUME
DISC SKIP STOP PLAY/PAUSE
TUNER CD
TEST CENTER/REAR
/DELAY
OPEN/CLOSE REPEAT RANDOM MODE
2
1
Adjustable