Yamaha EMX120CD - Manual (Page 43)

E-35
English
Adjusting CENTER LEVEL
If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in “Speaker
balance adjustment” on pages 16 to 17.
Control range : +10 to –20
1
Press the CENTER/REAR/DELAY selector button once or
more so that “CENT” appears on the display.
2
By continuously pressing the LEVEL control + or – button,
the level value changes continuously.
Notes
● This adjustment can be made only when the sound field
program
PRO LOGIC or 3 STEREO is selected.
● Once the output level is adjusted, the level value will be
the same in the
PRO LOGIC and 3 STEREO
programs.
● If the center channel mode is in the “PHANTOM” position,
the sound output level of the center speaker cannot be
adjusted. This is because in this mode, the center sound
is automatically output from the left and right front
speakers.
USING SOUND FIELD PROCESSOR
TIME
A
PROG
B C D
+ I0
E
CD TUNER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9 0
PRESET
INPUT
MUSIC PROGRAM
STANDBY/ON
DISPLAY SLEEP
ECHO
FLAT
LEVEL KARAOKE
VOLUME
DISC SKIP STOP PLAY/PAUSE
TUNER CD
TEST CENTER/REAR
/DELAY
OPEN/CLOSE REPEAT RANDOM MODE
Adjusting REAR LEVEL
If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in “Speaker
balance adjustment” on pages 16 to 17.
Control range : +10 to –20
1
Press the CENTER/REAR/DELAY selector button once or
more so that “REAR” appears on the display.
2
By continuously pressing the LEVEL control + or – button,
the level value changes continuously.
Notes
●
This adjustment can be made when a sound field program
except
3 STEREO is selected.
● Adjustment can be made to PRO LOGIC, HALL,
ARENA, DISCO, STADIUM and MONO MOVIE
individually.
2
1