Yamaha EMX120CD - Manual (Page 21)

E-13
English
STANDBY mode
While the power is on, pressing the STANDBY/ON switch
(or the STANDBY/ON switch on the remote control
transmitter) switches this unit to the standby mode. (In this
mode, the display shows only the time.) In this mode, main
voltage is still present inside the unit. If you want to switch
off this unit completely, disconnect the AC power plug from
the AC outlet.
STARTING THE OPERATION OF THIS UNIT
Turning this unit on or into the
standby mode
If the AC supply lead is connected to the AC outlet, this unit
can be turned on and turned into the standby mode by
pressing the STANDBY/ON switch on the front panel of this
unit or the STANDBY/ON switch on the remote control
transmitter.
*
While this unit is on, the display shows the name of
currently selected input source or other information.
In the standby mode, the display shows only the time.
Automatic turning this unit into the standby mode
This unit will be automatically turned into the standby mode if
30 minutes pass without any operation on the control parts of
this unit after a playback of CD ends.
*
This function is not available unless time setting is made
on the built-in clock.
INPUT
MUSIC PROGRAM
STANDBY/ON
DISPLAY SLEEP
FLAT
LEVEL
VOLUME
TUNER CD
TEST
CENTER/REAR
/DELAY
ECHO
KARAOKE
CD CHANGER RECEIVER EMX–120CD PRESET/TUNING/BAND A/B/C/D/E
OPEN/CLOSE
DISC 1 DISC 2 DISC 3
DISC CHANGE
VOLUME INPUT SELECTOR
VCR•LD/TV•CD•TAPE/MD•TUNER
CD TUNER
STANDBY/ON
PHONES
KARAOKE
PROGRAM
MEMORY
MUSIC
DISPLAY MEMORY AUTO/MAN’L REPEAT TIME
TIME ADJ TIMER HOUR MIN
INPUT TRIM MIC TONE MIC MIC MIXING
SOFT NORMAL MAX MIN
ECHO ECHO
Volume control
Front panel operation
Rotate the VOLUME control clockwise to increase the
volume, and counterclockwise to decrease the volume.
Remote control operation
Press the VOLUME + button to increase the volume and the
VOLUME – button to decrease the volume.
* Adjusted volume level is shown by the volume level meter
and in figures on the display.
VOLUME
VOLUME
VOLUME