Yamaha POCKETRAK 2G User Manual
Page 51
Appendix
POCKETRAK 2G Reference Manual
51
Cannot divide a file.
The file transfer speed (from PC to unit) is slow.
Recordings include unwanted noise.
“Connection” icon does not appear when the unit is connected to the PC.
The calendar does not show the correct date and time.
The playback is missing a small portion at the beginning of the file.
Possible cause
There may be insufficient free memory.
Corrective action
Erase unnecessary files. See
“Deleting the selected file” on page 23
.
Possible cause
The file is too short to divide.
Corrective action
You can divide only files that exceed a specific minimum recording time.
PCM... about one sec or longer
XHQ... about four sec or longer
HQ ..... about eight sec or longer
SP ...... about 16 sec or longer
LP....... about 32 sec or longer
Possible cause
The unit is connected to the USB1.1 terminal.
Corrective action
Connect the unit to a USB2.0 High Speed terminal.
Possible cause
Recording mode or microphone sensitivity may not be appropriately set.
Corrective action
Change the recording mode or microphone sensitivity and try to record again. Determine the
optimum setting for your recording environment.
See
“Selecting the recording mode” on page 9
“Selecting the microphone sensitivity” on
.
Format (initialize) the internal memory. See
“Formatting (Deleting all files in all folders)” on
.
Corrective action
Some computers may not cause the icon to be displayed on the unit, or may not recognize
the unit. Disconnect the unit from the PC, then reconnect it.
Corrective action
Set the date and time again. See
“Date and time settings” on page 7
Possible cause
In order to minimize noise, 0.1 seconds from the beginning of the file is faded-in for playback
(the volume will gradually increase).
Corrective action
If you’re using this device to play back a file that was created using DAW software such as
Cubase AI, insert a blank space of at least 0.1 seconds at the beginning of the file when creat-
ing it.