Using timers, Setting the alarm timer – Yamaha POCKETRAK 2G User Manual
Page 25
Using timers
POCKETRAK 2G Reference Manual
25
Using timers
Set the date and time before you set any timers (
Setting the alarm timer
A file (or an alarm sound) can be played at a designated time. Before you program the timer,
place the file to be played in the ALARM folder (
). A beep will sound for 10 seconds if
there are no files in the ALARM folder.
1.
While the unit is stopped, press the MENU/STOP button for at least two (2)
seconds.
2.
Press the Y or T button to select “COMMON”, then press the W button.
3.
Press the Y or T button to select “TIMER & ALARM”,
then press the W button.
4.
Press the Y or T button to select “ALARM”, then press
the W button.
Note:
· If you want to cancel the alarm timer, select “CANCEL” instead, then press the W but-
ton.
5.
Press the Y or T button to specify the hour, then press
the W button.
The minute digits are highlighted.
6.
Press the Y or T button to specify the minute, then press the W button.
7.
Press the Y or T button to select the alarm sound, then
press the W button.
8.
Press the MENU/STOP button twice to exit from the menu setting mode.
At the programmed time, the alarm timer will be activated and a file or beep will
be played through the speaker or headphones.
BEEP:
Beep sound
MUSIC:
Plays the audio file in the ALARM folder.