Appendix, Troubleshooting – Yamaha POCKETRAK 2G User Manual
Page 49
Appendix
POCKETRAK 2G Reference Manual
49
Appendix
Troubleshooting
The unit does not operate.
Buttons do not work.
No sound.
Files in the VOICE (A, B, C, D, S) or L (line) folder cannot be played.
Files in the M (music) folder cannot be played (correctly or at all).
Cannot play back files in the Playlist folder, and the unit displays “- M - - S”.
Possible cause
Battery is not inserted properly or is dead.
Corrective action
Reinsert the battery correctly.
Recharge the eneloop or replace with a new alkaline battery.
Possible cause
Internal memory error.
Corrective action
Format (initialize) the internal memory and then try recording again.
Possible cause
The Hold function is set.
Corrective action
Turn off the function.
Possible cause
The USB terminal is still connected to the computer.
Corrective action
Disconnect the unit from the computer.
Possible cause
The volume is turned down too low.
Corrective action
Adjust the volume.
Possible cause
The file name is wrong.
Corrective action
If you modify the file name using your computer, the file may become unplayable. Correct the
file name to “IC_X(folder name)_XXX (file number).MP3” or “IC_X_XXX.WAV”.
Possible cause
The file is not in a playable format.
Corrective action
Use MP3/WMA-format files.
Possible cause
Files on the PC were not transferred to the MUSIC folder.
Corrective action
Transfer the files to the MUSIC folder on the Removable Disk.
Possible cause
You attempted to play a data file, which cannot be played on the unit.
Corrective action
Create a file using different encoder (MP3/WMA conversion) software.
Possible cause
Music files you have erased remain in Playlist.m3u.
Corrective action