Handling travan cartridges – Quantum Internal Storage System Travan 40 GB User Manual
Page 18
Operation and Maintenance
Handling Travan Cartridges
14
Quantum Travan 40 GB Internal Storage System
Figure 10 To Load a
Cartridge
To Unload a Cartridge
3
Wait until the
Drive-activity
/
Eject
button light is off. Then push the
Eject
button. When the cartridge has been ejected by the drive, grasp the
exposed sides of the cartridge and pull the cartridge straight out. If the
drive-activity light has gone out, but you believe your backup or restore
operation did not complete, repeat the backup or restore.
Handling Travan Cartridges
3
Although Travan tape cartridges are ruggedly built, they must be
handled with care. Observe the following precautions:
• Store cartridges in their protective cases when you are not using
them.
• Keep cartridges away from dust, dirt and moisture.
• Keep cartridges away from direct sunlight and heat sources, such as
radiators or warm air ducts.
Caution:
Do not remove a tape cartridge while the drive-activity
light is on.
Drive-activity light /
Eject button
Write-protect
switch (red)