NEC GT2000 - Manual (Page 72)

E-72
Audio Control of the Switcher
This is the audio adjustment of the switcher AUDIO OUTPUT.
Setting the Volume (Volume)
This function sets the volume adjustment data that corresponds to the slot.
Select [Switcher] from the main menu.
Press the cursor ▲/▼ button and select [Volume].
When the item to be adjusted is selected, the adjustment bar of the selected
item is displayed at the bottom edge of the display.
Adjust with the cursor
ᮤ (–)/ ᮣ (+) button.
The adjustment range is from 0 to 63.
(–) Direction .......... The volume decreases.
(+) Direction .......... The volume increases.
Adjusting Volume of Switcher with Remote Control (Audio
Select)
This is a setting that adjusts the volume of the switcher with the VOLUME
button on the remote control.
Select [Switcher]
→
[Audio Select] of the main menu.
When the item to be adjusted is selected, the setting condition is displayed at
the bottom edge of the display.
A press of the ENTER button changes the display to the audio control display.
Press the cursor ▲/▼ button and select Switcher / Remote control.
Switcher ................ Permits volume adjustment of the switcher using the
VOLUME button of the remote control.
Projector ............... Permits volume adjustment of the projector using the
VOLUME button of the remote control.
* The Switcher menu displays only when the switcher is connected with the
GT2000/GT2000R and Switcher Control mode is set to either SW 1 Level or
SW 2 Level.
Note:When the switcher is not connected, "Switcher" cannot be selected.
Switcher
R Gain
G Gain
B Gain
Color
Tint
Sharpness
Volume
Audio Select
Projector
Switcher
R Gain
G Gain
B Gain
Color
Tint
Sharpness
Volume
Audio Select
– +32