NEC GT2000 - Manual (Page 64)

E-64
Changing the Default Values of the Screen Data (Change
Default)
The projector is equipped with default area that stores screen data having a
one- to - one correspondence with the standard memory. At the start, this
memory contains the screen data of the standard memory.
When the display area of the personal computer that is being projected with the
standard memory is not normal, the correct screen data can be written to the
default area.
1. Projecting Input Signals that Are to Be Default Values
Input the signal of the computer and adjust the screen to a proper screen.
This will be the default value of the screen data at this resolution.
2. Displaying the Signal Registration Menu Display
Select [Memory]
→
[User Memory] or [Channel Memory] from the main
menu, then press the ENTER button.
The signal registration menu display will appear.
See "Selecting Memory Display" on Page E-57 for details.
3. Changing the Default Values of the Screen Data
1) Press the remote control ▲/▼ button and select [Change Default], then press
the ENTER button.
The default change verification display will appear.
2) Press the remote control ▲/▼ button and select the Yes/No, then press the
ENTER button.
The defaults have now been changed.
To turn off the display, press the MENU button twice. The display will return
to the main menu. A further press of the MENU button will turn off the display.
To initialize the default area (or to become the same as the standard memory)
1) Press the NORMAL button.
2) Press the remote control ▲/▼ button and select the Yes/No, press the ENTER
button.
The default area has now been returned to its original factory settings.
Signal Entry
Entry Copy
Entry Move
Entry Delete
Change Defalut
Memory edit
Load
Store
Normalize?
Change Defalut
Yes
No