NEC GT2000 - Manual (Page 12)

E-12
AC IN
15
9
11 13 10 12 14
9 Remote Input Mini Jack
Connect your remote control cable here for wired operation.
Remote Output Mini Jack
This terminal enables you to loop up to 64 projectors with
the same remote control operation.
10 Video Input (RCA)
Connect a VCR, DVD player, laser disc player, or document
camera here to project video.
11 Left Channel/Mono Audio Input Jack (RCA)
This is your left channel audio input for stereo sound coming
from video equipment or audio system. This also serves as
your monaural audio input.
Right Channel Audio Input Jack
This is your right channel audio input for stereo sound.
12 Audio Output Mini Jack
Connect additional external speakers here to listen to audio
coming from the RGB 1, RGB 2, Video or S-Video input.
13 REMOTE 1 Connector (Mini D-Sub 15 pin)
Connect the control cable (available as an option) here when
the projector is used with the optional ISS-6020 or with
multiple projectors.
NOTE: The ISS-6020/ISS-6020G Switcher is compat-
ible with this projector.
14 External Control Connector (Mini D-Sub 15 pin)
This connector is for switch closure control or other external
controller.
15 Built-in Security Slot ( )
This security slot supports the MicroSaver ® Security Sys-
tem.
MicroSaver ® is a registered trademark of Kensington
Microware Inc. The logo is trademarked and owned by
Kensington Microware Inc.
S-VIDEO INPUT AUDIO
VIDEO INPUT AUDIO
REMOTE 1
RGB 1 AUDIO
REMOTE 2/PC
EXT-CTL
RGB 2
AUDIO
AUDIO
OUTPUT
REMOTE
OUTPUT
REMOTE
INPUT L/MONO R L/MONO R
L/MONO R