NEC GT2000 - Manual (Page 48)

E-48
– + 32
Picture
Brightness
Contrast
Volume
Color
Tint
Sharpness
Image Mode
White Balance
Scan Mode
Interpolation
RGB/YCbCr
RGB/YCbCr
RGB
YCbCr
Selecting RGB/YCbCr (RGB/YCbCr)
This function sets the RGB 1/2 and YCbCr 1 input modes of the
RGB input 1/2 connector.
These settings are selected when there is input of a color-differ-
ence signal from a DVD player, etc.
Select [Picture]
→
[RGB/YCbCr] from the main menu and press
the ENTER button.
Select RGB/YCbCr with the cursor ▲/▼ button.
RGB ..................... RGB input mode (when projecting from
personal computers and work stations)
YCbCr ................... YCbCr input mode (when projecting from
DVD players)
When the RGB input is returned to the standard adjustment with
the SETUP and ENTER buttons of the remote control, the RGB/
YCbCr setting will be RGB input.
Direct Selection
You can select RGB or YCbCr input directly with the remote
control.
To do, press and hold CTL, then press RGB1 (or RGB2).
A press of CTL and RGB 1 (or RGB 2) buttons toggles between
RGB and YCbCr.
Note that this setting is not saved even though the auto save
function is set to "ON".