PSC PT2000 - Manual (Page 94)

Transferring Data With PSC Utilities
84 PT2000™ & TopGun™
s performs the transfer “silently” (without displaying received
data on the screen).
h displays help on program usage and options.
For example: updtfer /dev/tty2a readin.dat -r would receive
data from a portable connected to a serial port named /dev/tty2a and
place data in a file named
readin.dat .
The UPDTFER program has the following settings. The portable's
communications settings must match.
z Baud rate : 9600
z Stop bits : 1
z Data bits : 8
z Parity : None
z Flow control : ACK/NAK ; no XON/XOFF
The UPDTFER program returns an exit status of 0 if the transfer is
successful. If the transfer is unsuccessful, it returns a nonzero status, such
as 1.
PT2000.book Page 84 Thursday, February 26, 2004 9:34 AM