PSC PT2000 - Manual (Page 55)

Collecting Data
User’s Guide 45
Figure 3-61: TIMESTMP Menu
3. From the application menu, select .
Figure 3-62: Select COLLECT
4. Scan the bar code for an item, or use the keypad to enter the
item’s ID number or description (for example, 00-693-00). (If
you use a scanner, the code is entered automatically; if you use the
keypad, you must press the
key).
Figure 3-63: Enter the ITEM ID
The item ID appears on the third line of the screen, followed by
the date and time, and the portable is ready to accept another
item ID
Figure 3-64: Enter Additional ITEM ID s
5. Repeat step 4 until you have collected IDs for all items. Then
press the
key to return to the application menu.
F1=TIME STAMP
F2=WEDGE
F3=SET TIME
F4=EXIT
Note: For information about using the portable as a wedge, see
“Using the Portable as a Keyboard Wedge” on page 21.
TIME STAMP
F2=COLLECT
F3=FILE OPTIONS
F4=EXIT
ITEM ID
00-693-00
F3=REV F4=EXIT
ITEM ID
00-693-00,05/01/
F3=REV F4=EXIT
PT2000.book Page 45 Thursday, February 26, 2004 9:34 AM