PSC PT2000 - Manual (Page 38)

Using the PT2000 and TopGun with PALPRO
28 PT2000™ & TopGun™
Figure 3-20: The Item ID Prompt
4. The location ID and item ID appear together on the third line of
the screen, separated by a comma, and the second prompt remains
on the screen.
z The portable is ready to accept another ID for an asset at the
current location.
Figure 3-21: The Next Item ID Prompt
5. When finished collecting asset IDs for the location, press the
key to return to the first prompt.
6. Repeat steps 2 - 5 until IDs for each asset at every location is
collected.
7. Press the key to return to the first prompt.
8. Press the key to return to the application menu.
The portable stores the collected data in a single ASCII text file. When
uploading the file to the PC, the data appears as a list. Each line in the
list contains two fields separated by a comma. The first field is the
location, and the second field is the equipment identification number.
The example in
Figure 3-22 is part of a data file uploaded from a
portable that used ASSETPRO to collect data.
ITEM ID
WH3E
¤
F3=REV F4=EXIT
ITEM ID
WH3E,004322
¤
F3=REV F4=EXIT
PT2000.book Page 28 Thursday, February 26, 2004 9:34 AM