Panasonic DIGA DMR-EZ47V - Manual (Page 61)

61
RQT8853
Connection and Setting
Connecting to a TV
Connecting to an Amplifi er or System
Component
HDMI is the next-generation interface for digital devices. When connected to an HDMI compatible unit, an
uncompressed digital audio and video signal is transmitted, enabling you to enjoy high quality digital video and audio
with just one cable. When connecting to an HDMI-compatible HDTV (High Defi nition Television), the output can be
switched to 1080p, 1080i or 720p HD video.
Please use the HDMI cables 5.0 meters (16.4 ft.) or less.
Notes
If connecting to equipment that is only compatible with 2 channel output, audio with 3 channels or more will be
down-mixed ( ¼ 94) and output as 2 channels (some discs cannot be down-mixed).
For display units compatible with HDCP (High bandwidth Digital Content Protection) that are equipped with a
digital DVI input terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching
cable (audio cannot be output).
Usually you can watch video from HDMI input on TV. When you want to playback VHS while recording on DVD,
switch to input 1 on TV.
Connecting with an HDMI (High Defi nition Multimedia Interface) Terminal
You can enjoy high-quality picture and audio by changing the audio/video (AV) cable connection between this unit
and your TV on pages 55 to 57 as follows.
HDMI IN
VIDEO
VIDEO VIDEO
R-AUDIO-L
R-AUDIO R-AUDIO-L -L
P R Y P B
T
F / UHF
S VIDEO S VIDEO
AV OUT
COMPONENT VIDEO OUT DVD/VHS COMMON OUT
DVD PRIORITY OUT IN1
INPUT 1
AUDIO IN VIDEO
Rear of TV
Rear of this unit
HDMI IN
VIDEO
OPTICAL
VIDEO VIDEO
R-AUDIO-L
R-AUDIO R-AUDIO-L -L
P R Y P B
DIGITAL AUDIO O
(PCM/BITSTREA
S VIDEO S VIDEO
AV OUT
COMPONENT VIDEO OUT DVD/VHS COMMON OUT
DVD PRIORITY OUT IN1
HDMI OUT HDMI IN
INPUT 1
AUDIO IN VIDEO
Rear of TV
Rear of Amplifi er or
System Component
Rear of this unit
(Only included in
DMR-EZ475V) (Only included in
DMR-EZ475V)
Set the TV input to HDMI in preparation and the RF output channel to “OFF” in step 2 (¼ 62).
Set “HDMI Video Output” and “HDMI Audio Output” to “On” (¼ 51). (The default setting is “On”.)
Audio/video cable
(included) Audio/video cable
(included)
Red White Yellow Red White Yellow
Red White Yellow Red White Yellow
Regarding “HDAVI Control” function
When connecting with a Panasonic TV (VIERA) or a receiver equipped with “HDAVI Control” function, linked
operations are possible. [
¼ 32, Linked Operations with the TV (EZ Sync TM “HDAVI Control TM ”)]
It is recommended that you use Panasonic’s HDMI cable.
Recommended part number: RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4
ft.), etc.
Non-HDMI-compliant cables cannot be used.