Panasonic DIGA DMR-EZ47V - Manual (Page 31)

31
RQT8853
Notes
 If the desired audio is not recorded, select the kind of audio for
“Select Audio Channel For DV Input” in the Setup menu ( ¼ 50).
 [RAM] Programs are recorded as a single item; breaks in the
images create chapters.
 If you use video camcorders from other manufacturer’s these are
not guaranteed to work.
 It is not possible to operate the unit from the connected DV
equipment.
 The DV equipment name may not be shown correctly.
 Date and time information is not recorded, even if displayed on the
camcorder.
 The DV IN terminal is not meant to be connected to a computer.
 This unit uses a 4-pin “DV IN” connector;
Your DV camcorder may use a 4-pin or 6-pin external connector.
Please consult your DV camcorder’s manufacturer to confi rm
correct external connection.
 You cannot record discs and play discs simultaneously.
Connect the cable while the power to both the unit and
the external device is off.
Front on the unit
S VIDEO IN 2 VIDEO /MONO AUDIO R L
4-pin DV Cable
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
DRIVE
SELECT
to select the DVD drive.
– External DV cannot be recorded to VHS.
REC MODE
to select the recording
mode for the disc (
¼ 14).
Insert a disc.
Turn on the DV equipment and
pause play on the DV equipment
at the point you want recording to
start.
DV connection detected.
Cancel Record to DVD
ENTER
DV camcorder connection
Start recording? “DV camcorder
connection” screen
may appear.
 to select “Record to DVD” then
ENTER
 to select “Rec.”,
then
ENTER
Recording from a DV Camcorder
Tips
When recording fi nishes
The confi rmation screen appears.
Press [ENTER] to fi nish DV camcorder recording.
To stop recording
Press [
 STOP].
The confi rmation screen appears. Press [ENTER].
 If the DV camcorder recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on. If that does not work, follow the instructions
on page 30.
Preparation:
 Turn on the unit.
 [RAM] If the disc is protected, release protection
( ¼ 44).
When “DV camcorder connection” screen does not
appear
Perform steps 1–4 ( ¼ above).
1. With the unit stopped
Press [FUNCTIONS].
2. Press [ , ] to select “Other Functions” then press [ENTER].
3. Press [ , ] to select “DV Camcorder Rec.” then press [ENTER].
You can proceed to step 6 ( ¼ right).
Ad
v
anced Features