Using the clipboard to copy data to another song – KORG D3200 User Manual
Page 80
70
(2) Select “CopyTrk.”
In the TRACK, “EditTrk” tab page, click the Edit Trk
Type
cell. In the Edit Trk Type dialog box, click “Copy
Trk”
and click the OK button (or press the panel YES
key).
(3) Select the copy mode.
Click the Mode button. In the Copy Mode dialog box,
select the desired mode and click the OK button (or
press the panel YES key).
(4) Select the copy-source track number.
• Click the popup button of the Source cell, and choose
track “1” in the Source Track dialog box. You can also
click the cell to select this.
• Check the IN and OUT locations. If you want to set
the locations with more precision, click the Source
WAVE
button, and use the Wave dialog box (
to set the location.
(5) Select the copy-destination track number.
• Click the popup button of the Destination cell, and
choose track “2” in the Destination Track dialog box.
You can also click the cell to select this.
If you specified two or more tracks as the “Source,” you must
specify the same number of tracks in “Destination.”
• Verify that the TO location is correct. If you want to set
the location with more precision, click the Destination
WAVE
button, and make your settings in the Wave
(6) Specify the number of time that you want to copy the
data.
Click the Times cell, specify the number of copies as “3”.
(7) Execute the editing operation.
Click the Exec. button. Then in the CopyTrk dialog box,
click the Yes button (or press the panel YES key) to exe-
cute the operation.
When the operation is finished, the display will indicate
“Completed.”
Click the OK button (or press the panel
YES
key).
(8) Check the results of the editing operation.
Press the LOC 3/TO key, and play back from the TO
location to verify that the data was copied correctly.
If you are not satisfied with the results, you can use
Undo to return to the previous state. (
Using the clipboard to copy data to another song
When you use the clipboard to copy data between tracks of
songs that have a different sampling frequency and/or bit
depth, the sampling frequency and/or bit depth will be con-
verted automatically. You can specify whether dithering will
be performed to make quantization noise less obtrusive
when converting 24-bit data to 16-bit data.
If the sampling frequency of the song copied to the clipboard is dif-
ferent from that of the copy-destination song, a certain amount of
time will be required for the conversion to be performed.
Copying the IN–OUT region of track 1 once from the 48
kHz/24-bit song number 001 to the TO location of track
2 of the 44.1 kHz/16-bit song number 002
Before you make these copy settings, verify that the correct virtual
tracks are selected for the copy-source (Source) and copy-destina-
tion (Destination).
→p.36 “1-3. Selecting a song”).
(2) Specify the region that you want to copy.
Set the following locations to specify the region for copy-
ing (
• Set the IN point to specify the beginning of the region
to be copied
• Set the OUT point to specify the end of the region to
be copied
(3) Select “CopyTrk.”
In the TRACK, “EditTrk” tab page, click the Edit Trk
Type
cell. In the Edit Trk Type dialog box, choose
“CopyTrk”
and click the OK button (or press the panel
YES
key).
(4) Select the copy-source track number.
• Click the popup button of the Source cell, and choose
track “1” in the Source Track dialog box. You can also
click the cell to select this.
• Check the IN and OUT locations. If you want to set
the locations with more precision, click the Source
WAVE
button, and use the Wave dialog box (
to set the location.
(5) Select the clipboard as the copy-destination track
number.
Click the popup button of the Destination cell, and
choose track “Clip” in the Destination Track dialog box.
You can also click the cell to select this.
(6) Execute the copy.
Click the Exec. button. Then in the CopyTrk dialog box,
click the Yes button (or press the panel YES key) to exe-
cute the operation.
When the operation is finished, the display will indicate
“Completed.”
Click the OK button (or press the panel
YES
key).
Any data currently in the clipboard will be overwritten.
→p.36 “1-3. Selecting a song”).
(8) Register the TO location. (
Verify that the TO location is correct. If you want to set
the location with more precision, click the Destination
WAVE
button, and make your settings in the Wave dia-
(9) Select “CopyTrk.”
In the TRACK, “EditTrk” tab page, click the Edit Trk
Type
cell.
In the Edit Trk Type dialog box, choose “CopyTrk” and
click the OK button (or press the panel YES key).
OverWrite:
The track data existing at the copy-destina-
tion will be overwritten.
Insert:
The copied data will be inserted; subsequent
existing data will be moved toward the end
of the song.
(5)
(2)
(3)
(4)
(6)
(7)