Konica Minolta BIZHUB PRO 1050E - Manual (Page 55)

4 About the Copied Data Processing Features
4-20 bizhub PRO 1050/1050e Scanner
Abo
u
t th
e Co
pie
d
Da
ta
Pr
ocessing
F
eat
ur
es
Chapter 4
4.7 Selecting a Storage Location
If you want not to print but to store copied data, select a storage location by
using the [STORE] tab.
Copied data can be stored in either of the following three types of storage
locations.
!
Detail
For more information of HDD-A to be used, refer to “About the HDD” on
page 2-2.
Scanner to HDD
You can store copied data on the HDD-A in the following steps.
0 A file can be registered to 10000 at the maximum for every box.
1
Select the [STORE] tab.
Scanner to HDD Storing data on the HDD-A enables you to print them again any-
time. Also, you can combine a print job sent from a computer and
copied data to print as one job.
Scanner to PC Copied data can be sent to a computer. You can edit/process the
data to print.
HDD to PC Copied data stored on the HDD-A can be sent to a computer. You
can edit/process the data to print.