Konica Minolta BIZHUB PRO 1050E - Manual (Page 129)

7 Using the Network Scanner Features
7-16 bizhub PRO 1050/1050e Scanner
Usin
g th
e Net
w
o
rk Sca
n
n
e
r
F
e
at
ur
es
Chapter 7
– To deselect the Name, press the selected Name again.
– If you input a destination manually, refer to "When an FTP server is
Input Manually" on Page 7-17.
7
Press the [Scanner Setting] key.
The Scanner Setting Basic screen
appears.
8
Configure the necessary items.
– For more information on the
configurations on the Scanner
Setting Basic screen, refer to
"About the Scanner Setting
Basic Screen" on Page 7-26.
9
Set an original and press the [Start] button.
– The original is scanned, and the scanned data are sent to an spec-
ified destination.
The Reserved JOB Confirmation screen appears.
10
To send another scanned data,
press the [Yes] key. To finish the
scanning, press the [No] key.
– Pressing the [Yes] key brings
you back to the Scanner Set-
ting Basic screen. Return to
step 8 and repeat the proce-
dures.