Konica Minolta BIZHUB PRO 1050E - Manual (Page 138)

Using the Network Scanner Features 7
bizhub PRO 1050/1050e Scanner 7-25
Usin
g th
e Net
w
o
rk Sca
n
n
e
r
F
e
at
ur
es
Chapter 7
4
Press the [Scanner Screen] key.
The Scanner Setting Basic screen
appears.
5
Configure the necessary items.
– For more information on the
configurations on the Scanner
Setting Basic screen, refer to
"About the Scanner Setting
Basic Screen" on Page 7-26.
6
Set an original and press the [Start] button.
– The original is scanned, and the scanned data are sent to an spec-
ified destination.
The Reserved JOB Confirmation screen appears.
7
To send another scanned data,
press the [Yes] key. To finish the
scanning, press the [No] key.
– Pressing the [Yes] key brings
you back to the Scanner Set-
ting Basic screen. Return to
step 5 and repeat the proce-
dures.