Sony DVS-9000 - Manual (Page 250)

Chapter 5
Wipes
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB07C05-WW.fm masterpage:Left
250
Basic Procedure for Wipe Settings
DVS-9000/9000SF
3-704-674-01 (1)
Setting the wipe pattern replication (Multi)
You can set pattern replication independently for the main pattern and sub
pattern.
Use the following procedure.
1
In the M/E-1> Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
Press the [Multi] button, turning it on.
3
Set the following parameters.
a) See page 53.
4
To make more adjustments, press the [Multi Adjust] button.
The Multi Adjust menu appears.
5
Make the following settings, as required.
H Invert: When this is on, alternate tiles are inverted left-to-right.
V Invert: When this is on, alternate tiles are inverted top-to-bottom.
Non-Mask: When this is on, even if the positioner function is used to
move the pattern position, the pattern is always present on the screen.
Position: By adjusting the following parameters, move the pattern position
within the divisions determined in step 3 .
a) See page 51.
Making a wipe pattern like a Venetian blind (Pairing)
Use the following procedure.
1
In the M/E-1 > Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
Knob Parameter Adjustment Setting values
1 H Multi Number of repetitions of pattern
horizontally 1 to 63
2 V Multi Number of repetitions of pattern
vertically 1 to 63
3 Shift Replication layout −
100.00 to +100.00 a)
Knob Parameter Adjustment Setting values
1 Position H Horizontal position of pattern −
200.00 to +200.00 a)
2 Position V Vertical position of pattern −
200.00 to +200.00 a)