Sony DVS-9000 - Manual (Page 201)

201
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB06C04-WW.fm masterpage:Right
Key Setting Operations Using Menus
Chapter 4
K
e
ys
DVS-9000/9000SF
3-704-674-01 (1)
Key Type Setting
Setting the key type in a menu
Use the following procedure.
1
In the M/E-1>Key1 menu, select HF1 ‘Type.’
The Type menu appears.
2
In the group, select the key type.
Luminance: luminance key
Linear: linear key
Chroma: chroma key
Color Vector: color vector key
Wipe Pattern: wipe pattern key
Key Wipe Pattern: key wipe pattern key
For the selected key type, you can now set the parameters.
For an overview of the key types, see page 36.
3
Carry out the following settings as required, depending on the key type
selected in step
2 .
To enable clean mode (see page 37) for a luminance key, linear key or
color vector key: Select [Clean Mode] so that it is set on.
When clean mode is enabled, key fill is added to the background
without cutting out with key source.
When chroma key is selected: Select [Chroma Adjust] to access the
Chroma Adjust menu (see page 204), and make the required settings.
When a wipe pattern key is selected: In the M/E-1>Wipe menu (see page
238), select the pattern and set any modifiers, then return to the M/E-
1>Key1 menu.
When a key wipe pattern key is selected: In the M/E-1>Key1>
Transition> Wipe Adjust menu (see page 254), carry out pattern
selection and modifier setting, then return to the M/E-1>Key1>Type
menu.
Note
For a wipe pattern selected for a wipe pattern key or key wipe pattern key,
the [Edge] and [Direction] modifier settings are not available.