SUPER MICRO Computer MIIC-203 - Manual (Page 25)

26
Diagnostic Set Up Screen
Diagnostic Set-up (iPort Only)
On the Diagnostic Set-up screen you can set the following parameters:
1. iPort Log File Level
Select iPort logging level.1 gives minimal info, 4 is verbose. Use the log
file to troubleshoot communication problems.
2. Log File Name
iPort log file name if enabled.
3. Log File Size (Lines)
iPort log file length if enabled.
4. Set the Destination Slave Address
On the main screen, use the I 2 C Destination Address list control to set the
slave address of the device you want to communicate with.
Additional operating information is available by viewing the Status and Log
File. (Option available only for the iPort).