Menu configuration and basic menu operations, Function menu (with the dxc-d30/d35 series) – Sony Remote Control Panel RCP-D50/D51 User Manual
Page 30
![background image](/manuals/138359/30/background.png)
30
Menu Configuration and Basic Menu Operations
Page
Menu
Submenu
Control item
Function
Paint 4
CLS/EVS
TLCS
To turn the TLCS (total level control) function ON/OFF
(cont.)
Shutter
To turn the shutter function ON/OFF
CLS
To turn the CLS (clear scan) function (which reduces noise on the
horizontal scan lines when the monitor screen connected to a PC is
shot) ON/OFF
EVS
To turn the EVS mode (which reduces flicker by increasing the
vertical resolutions) ON/OFF
• Shutter
To select the shutter speed
• CLS
To adjust the CLS frequency
Function menu (with the DXC-D30/D35 series)
Menu
Submenu Control item
Function
Operation
Jump menu 1
To jump to the adjustment screen designated for Menu 1 in Menu Set
a)
(Default: White of Paint 1)
Jump menu 2
To jump to the adjustment screen designated for Menu 2 in Menu Set
a)
(Default:Black of Paint 1)
Jump menu 3
To jump to the adjustment screen designated for Menu 3 in Menu Set
a)
(Default: Flare of Paint 1)
Jump menu 4
To jump to the adjustment screen designated for Menu 4 in Menu Set
a)
(Default: Gamma/Knee
of Paint 1)
Jump menu 5
To jump to the adjustment screen designated for Menu 5 in Menu Set
a)
(Default: Detail of Paint 2)
Jump menu 6
To jump to the adjustment screen designated for Menu 6 in Menu Set
a)
(Default: Skin Detail of
Paint 2)
Jump menu 7
To jump to the adjustment screen designated for Menu 7 in Menu Set
a)
(Default: Matrix of Paint
3)
Shutter
To turn the shutter function ON/OFF
• Shutter
To select the shutter speed
CLS
To turn the CLS (clear scan) function ON/OFF
• CLS
To select the CLS frequency
TLCS
To turn the TLCS (total level control) function ON/OFF
• Master Gain
To select the master gain value among –3/0/3/6/9/12/18/18+DPR/24/24+DPR/HYPER Gain
SW
Page1
Skin Detail
To turn the skin detail function ON/OFF
Detail Gate
To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail
correction or the skin matrix adjustment)
ATW
To turn the ATW (auto tracing white balance) function (which automatically adjusts the white
balance when lighting conditions change) ON/OFF
TLCS
To turn the TLCS (total level control) function ON/OFF
Auto Knee
To turn the Auto Knee function ON/OFF
Skin Matrix
To turn the skin matrix function ON/OFF
Flare Off
To turn the flare correction function ON/OFF (OFF while the button is lit)
Page 2
Knee Aperture
To turn ON/OFF the detail correction to the level higher than the knee point
Aperture
To turn the aperture correction ON/OFF
DL
To turn ON/OFF the DynaLatitude function (for automatically setting the contrast between the
bright and dark areas by detecting the levels of the subject in these areas)
White Clip Off
To turn the white clip function ON/OFF (OFF while the button is lit)
Detail Off
To turn the detail adjustment function ON/OFF (OFF while the button is lit)
Gamma Off
To turn the gamma adjustment function ON/OFF (OFF while the button is lit)
Matrix Off
To turn the linear matrix adjustment function ON/OFF (OFF while the button is lit)
a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.