Menu configuration and basic menu operations – Sony Remote Control Panel RCP-D50/D51 User Manual
Page 22
![background image](/manuals/138359/22/background.png)
22
Menu Configuration and Basic Menu Operations
Page
Menu
Submenu
Control item
Function
Paint 4
White Clip
• Master
To adjust the amount of white clip (the highest white level). As the
value becomes larger, the output level decreases.
TLCS
TLCS
To turn the TLCS (total level control) function ON/OFF
• AGC/C.Point
To set the f-stop value (f-2, f-2.8, f-4, or f-5.6) at which the iris
control is switched to AGC (auto gain control)
• AGC/Limit
To set the upper limit value for the AGC (3 dB/6 dB/9 dB/12 dB/
18 dB) adjustment
• AE/C.Point
To set the f-stop value (f-5.6, f-8, f-11, or f-16) at which the iris
control is switched to the AE (auto exposure)
• AE/Limit
To set the upper limit value for AE control (100/150/200/250)
Auto Iris
STD
To select the standard auto iris mode
Spot Light
To select the auto iris mode for shooting spot-lit subjects
Back Light
To select the auto iris mode for shooting back-lit subjects
CLS/EVS
TLCS
To turn the TLCS (total level control) function ON/OFF
Shutter
To turn the shutter function ON/OFF
CLS
To turn the CLS (clear scan) function (which reduces noise on the
horizontal scan lines when the monitor screen connected to a PC is
shot) ON/OFF
EVS
To turn the EVS mode (which reduces flicker by increasing the
vertical resolutions) ON/OFF
• Shutter
To select the shutter speed
• CLS
To adjust the CLS frequency
Paint 5
Low Key Sat
• Level
To adjust the low key saturation level
Auto Knee
Adaptive
To turn ON/OFF the function that makes the knee correction slope
smooth to make the gradation natural